Oxiperm Pro OCD-162-60

Reliable preparation and dosing of chlorine dioxide from diluted solutions for water disinfection. Oxiperm Pro systems produce chlorine dioxide using diluted solutions of sodium chlorite (NaClO2 7,5%) and hydrochloric acid (HCl 9%). They are available in four capacity levels, producing 5, 10, 30 and 60 g/h of chlorine dioxide respectively.

For further information about the Oxiperm Pro OCD-162-60 Generator please call us on 01246 813110 or email info@advanced-water.co.uk - Alternatively you can complete our online enquiry form.

Oxiperm Pro OCD-162-60

Components

  1. Measuring and control unit
  2. Reaction tank
  3. Reservoir tank
  4. Absorption filter
  5. Dosing pump for sodium chlorite
  6. Dosing pump for hydrochloric acid
  7. Dosing pump for chlorine dioxide
  8. Solenoid valve for dilution water
  9. Suction set

Conditions for Installation

  • No outdoor installation, installation site must be protected against sun and frost, and well-ventilated
  • Protection against unauthorized access
  • The system has to be wall-mounted vertically, the component tanks have to be situated below the system
  • Temperature of dilution water 10 - 30 °C
  • Water connection 3 - 6 bars, floor-drain and appropriate mains supply must be provided.

Note: In case of quantity fluctuations in the main water flow, the use of a bypass mixing module (see Accessories) or the version with digital dosing pump is recommended, in order to optimise the blending and to minimise the risk of corrosion.

For further information about the Oxiperm Pro OCD-162-60 Generator please call us on 01246 813110 or email info@advanced-water.co.uk - Alternatively you can complete our online enquiry form.